Kyocera ECOSYS PA6000 Series User Manual

8-11
Setup and Registration (System Menu) > Operation Method
Print Settings
[Menu] key > [ ] [ ] key > [Print Settings] > [OK] key
Configure settings for printing.
Item Description
Paper Source Select the default paper source from Cassette 1-5 and multi purpose tray.
Values: MP Tray, Bulk Feeder, Cassette 1 to 5
NOTE
•[Bulk Feeder] is displayed when the optional large capacity feeder is installed.
•[Cassette 2] to [Cassette 5] are displayed when the optional paper feeder is installed.
Auto Cass.Change Select the following actions when the paper runs out in the paper source while printing.
Values: Off, On
NOTE
When selecting [Off], the machine displays "Add the following paper in cassette #." (# is a
cassette number), or "Load paper in MP tray." and stops printing.
Load the paper according to the paper source displayed to resume printing.
To print from the other paper cassette, select [Alt.]. Select the desired paper source, and
then
select the [OK] key.
When selecting [On], the machine continues printing automatically when the other
cassette contains the same paper as the currently-used cassette.
MP Tray Priority If paper is set in the MP Tray then it is possible for priority to be given to that MP tray in
the paper feed.
Values
Off: The printer driver settings are followed.
Auto Feed: If Auto is selected in the printer driver and there is paper in the MP tray
then the paper feed will be from the MP tray.
Always: If there is paper in the MP tray then the paper feed will be from the MP tray
regardless of what is set in the printer driver.
Paper Feed Mode While printing from the computer, select how to feed paper when the paper source and
type are specified.
Values
Auto: Search the paper source that matches the selected paper size and type.
Fixed: Print on paper loaded in the specified paper source.
Duplex Select binding orientation for duplex mode.
Values: Off, Bind Long Edge, Bind Short Edge
Paper Output Select either the top tray or the optional Face-up Rear Output Tray for the output stack.
Values: TopTray FaceDown, RearTray FaceUp
NOTE
This function can be used for ECOSYS PA5000x/ECOSYS PA5500x/ECOSYS PA6000x.
Override A4/LTR Select whether to treat A4 size and Letter, which are similar in size, as the same size when
printing.
Values
Off: A4 and Letter are not regarded as the same in size.
On: A4 and Letter are regarded as the same in size. The machine will use whichever
size is in the paper source.

Kyocera ECOSYS PA6000 Series Specifications

General

Brand	Kyocera
Model	ECOSYS PA6000 Series
Category	All in One Printer
Language	English