8-12
Setup and Registration (System Menu) > Operation Method
Emulation Set. â
Emulation Select the emulation for operating this machine by commands oriented to other types of
printers.
Values: PCL6, IBM Proprinter, EPSON LQ-850, Line Printer, KPDL, KPDL(Auto)
KPDL Error Rpt. When you have selected [KPDL] or [KPDL (Auto)], set "KPDL Error Report".
Values: Off, On
Alt. Emulation When you have selected [KPDL (Auto)] as emulation mode, you can switch between KPDL
and another emulation mode (alternative emulation) automatically according to the data
to print.
print.Values: PCL6, IBM Proprinter, EPSON LQ-850, Line Printer
Font You can select the default font. The default font can be one of the internal fonts or a font
that is downloaded to the printer memory or stored on SD card, or SSD.
In this menu, you can also set the type and pitch for Courier and Letter Gothic.
Font Type Set the font type.
Values: Internal, Option
[Option] is displayed when the optional SD card or SSD is installed.
Font ID Set the font ID.
Courier Courier font thickness can be set.
Values: Regular, Dark
Letter Gothic Letter Gothic font thickness can be set.
Values: Regular, Dark
Size You can change the size of the default font.
Values: 4.00 to 999.75 characters per inch (in 0.25-point increments)
Pitch You can set the character pitch for fixed fonts.
Values: 0.44 to 99.99 characters per inch (in 0.01 character-per-inch increments)
Code Set You can change the character code set. Available character code sets vary depending on
the current font.
Item Description
To Next Page
Loading...
Need help?
General
