Kyocera ECOSYS PA6000 Series

8-15
Setup and Registration (System Menu) > Operation Method
Network
Configures network settings.
Host Name
[ Menu ] key > [ ] [ ] key > [ Network ] > [ OK ] key > [ ] [ ] key > [ Host Name ] > [ OK ] key
Wi-Fi Direct Set
[ Menu ] key > [ ] [ ] key > [ Network ] > [ OK ] key > [ ] [ ] key > [ Wi-Fi Direct Set ] > [ OK ] key
Set Wi-Fi Direct.
Item Description
Host Name Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-46)
NOTE
This function is displayed when the optional Wireless Network Interface Kit is installed.
Item Description
Wi-Fi Direct Select whether to use Wi-Fi Direct.
Value: Off, On
Device Name Specify the device name.
NOTE
• Up to 32 characters can be entered.
• This function is displayed when [Wi-Fi Direct] is set to [On].
IP Address Check the IP address of the machine.
TCP/IP Settings (page 8-18)
NOTE
This function is displayed when [Wi-Fi Direct] is set to [On].
Auto Disconnect Automatically disconnect devices connected through Wi-Fi Direct.
Value: Off, On
NOTE
This function is displayed when [Wi-Fi Direct] is set to [On].
Disconnect Timer If you select [ON] to Auto Disconnect, set the waiting time for automatic disconnection.
Value: Day (00 to 99), Hour (00 to 23), Minute (00 to 59)
NOTE
This function is displayed when [Auto Disconnect] is set to [On].
Persistent Group Set whether Wi-Fi Direct connection as Persistent Group (information for the connection
is kept even if the power is turned off).
Value: Off, On
NOTE
This function is displayed when [Wi-Fi Direct] is set to [On].