5-3
Operation on the Machine > Using Document Boxes
Using Document Boxes
Document Box contains four types of component boxes which provide the following functions.
The following types of document boxes are available.
âĸCustom Box
âĸJob Box
âĸUSB Drive Box
What is Custom Box?
Custom Box is a component box which you can create within the Document Box and store data for later retrieval.
You can create or delete a Custom Box, and manipulate data in various ways as described below:
âĸ Creating a New Custom Box
âĸ Printing Document in a Custom Box
âĸ Editing Documents in a Custom Box
âĸ Deleting Documents in Custom Box
What is Job Box?
Job Box is a generic name for the "Private Print/Stored Job Box", "Quick Copy/Proof and Hold Box", and "PIN Print
Box". These Job Boxes cannot be created or deleted by a user.
What is USB Drive Box?
A USB drive stick can be connected to the USB drive slot on the machine to print a saved file. You can print data
directly from the USB drive without a PC.
âĸ To use Custom Box, an optional SSD must be installed in the machine.
HD-17/HD-18/HD-19 "SSD" (page 11-5)
âĸ The operation on Custom Box can also be performed from Command Center RX.
Command Center RX User Guide
âĸ You can set up the machine so that temporary documents in job boxes are automatically deleted.
JobRet. Deletion (page 4-31)
âĸ For details on operating the "Private Print/Job Hold Box", "Quick Copy/Proof and Hold Box", or "PIN Print
Box", refer to the following:
Printing Data Saved on the Printer (page 4-18)
To Next Page
Loading...
Need help?
General
