9-11
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Server Settings
Set the server type when network authentication is enabled.
1
Display the screen.
1 [Menu] key > [ ] [ ] key > [User/Job Account] > [OK] key
2 [ ] [ ] key > [User Login Set.] > [OK] key > [ ] [ ] key > [User Login] > [OK] key > [ ] [ ] key > ī
[Netwk Auth. Set.] > [OK] key > [ ] [ ] key > [Server Type] > [OK] key
2
Configure the settings.
1 Select [NTLM], [Kerberos], or [Ext.] for the [Server Type], and select [OK] key.
When [NTLM], [Kerberos] is selected, you can configure multiple authentication servers.
2 Enter the host name (64 characters or less) for the Authentication Server and select the [OK] key.
When selecting [Ext.] as the server type, enter the port number.
3 Select the domain name for the Authentication Server, and select the [OK] key.
If the domain has not been set, select the number where "----------------" is displayed and select [Menu]. Select [Edit]
and select the [OK] key then enter the domain name (in 256 characters or less). Select the [OK] key and the domain
will be registered.
To edit or delete a domain name that has already been registered, select that domain name and select [Menu].
If the User Authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login User Name or Password, please contact your Administrator.
âĸ Up to 10 domain names can be registered.
âĸ If the login user name and password are rejected, check the following settings.
- Network Authentication setting of the machine
- User property of the Authentication Server
- Date and time setting of the machine and the Authentication Server
To Next Page
Loading...
Need help?
General
