5-8
Operation on the Machine > Using a Custom Box
2 Select the [OK] key.
To use the settings used at the time of printing (when the document was saved), select [ ] [ ] key > [Print] > ī
[OK] key.ī
To change the print settings, select [ ] [ ] key > [Print(ChangeSet)] > [OK] key.
If [Print] is selected, change the number of copies to print as necessary.
If [Print (ChangeSet)] is selected, change the print settings. For the features that can be selected, refer to the
following:
Printing of the selected document begins.
Moving Documents in Custom Box
This function allows you to move documents stored in custom boxes into other boxes. The procedure for moving
documents is explained below.
1
Display the screen.
1 Select the [Document Box] key.
2 Select the box containing the document you want to move, and select the [OK] key.
2
Move the documents.
1 Select the document you want to move, and select [Select].
A checkmark will be placed on the right of the selected file.
Checkmarks will be placed on the right of the all files when [All Files] is selected.
When all files in the Custom Box are checked, all checkmarked files are deselected.
Select the checkmarked file and select [Select] again to cancel the selection.
2 [OK] key > [ ] [ ] key > [Move] > [OK] key
Custom Box (Printing) (page 6-2)
If the default screen of the box is set to a Job Box, display the Custom Box screen.
[Document Box] key > [Back] key > [ ] [ ] key > [Custom Box] > [OK] key
âĸ If a custom box is protected by a password, enter the correct password.
âĸ Select [Menu] to perform the following operations.ī
- [Sort]: Sort the boxes.ī
- [Search(No.)]: Search using the box number.
Select [Menu] to perform the following operations.
âĸ [Search(Name)]: Search using a file name.
âĸ [Box Detail/Edit]: Show and edit box details.
Editing Custom Box (page 5-6)
âĸ [File Detail]: Display the details for the selected file.
âĸ [Delete]: Delete the document.
Deleting the Custom Box (page 5-6)
To Next Page
Loading...
Need help?
General
