3-8
Preparation before Use > Loading Paper
Loading Statement in the Cassettesī
(ECOSYS PA5000x/ECOSYS PA5500x/ECOSYS PA6000x for inch
models)
Load Statement in the cassettes. Here, we'll explain the procedures for cassette 1, as an example.
1
Pull the cassette completely out of the machine.
2
Adjust the cassette size.
1 Adjust the position of the paper width guides located on the left and right sides of the cassette. Press
the paper width adjusting tab and slide the guides to the Letter/Legal size.
Paper sizes are marked on the cassette.
2 Adjust the paper length guide to the paper size required. Press the paper length adjusting tab and slide
the guides to the A6 size.
When pulling the cassette out of the machine, ensure it is supported and does not fall out.
To Next Page
Loading...
Need help?
General
