7-5
Status/Job Cancel > Device Information
Device Information
Configure the devices/lines installed or connected to this machine or check their status.
1
Display the screen.
Select [Status], while the machine is printing or awaiting printing.
2
Check the status.
Select the items you want to check. Then, select the [OK] key to show the status of the selected device.
The items you can check are described below.
"Rmt. Op. Status"
The status of the Remote Operation Status is displayed.
"Keyboard"
The status of the optional USB Keyboard and Bluetooth Keyboard are displayed.
"Network"
The network connection status appears.
"Wi-Fi"
âĸ This function is displayed when the wireless network function is available on the machine.
âĸ The Wi-Fi connection status and network name (SSID) of the machine appear.
"Wi-Fi Direct"
This function is displayed when the wireless network function is available on the machine.
âĸ Select [ ] [ ] key > [PushButton Setup] > [OK] key, and execute the push button of the device you want
to connect to start the connection to the machine.
âĸ Select [ ] [ ] key > [Detail Info] > [OK] key, information on the device that is connected by Wi-Fi Direct
appears.
âĸ Select [ ] [ ] key > [ConnectionStatus] > [OK] key > [Menu]> [ ] [ ] key > [ConnectedDevices] > [OK]
key to display the list of connected devices.
âĸ Select [ ] [ ] key > [ConnectionStatus] > [OK] key > [Menu]> [ ] [ ] key > [DisconnectAll] > [OK] key
to disconnect all devices.
"Option Network"
The connection status of the optional Network Interface Kit or Wireless Network Interface Kit is displayed.
"Unit Condition"
Displays the time remaining on the developer unit and the cassettes.
To Next Page
Loading...
Need help?
General
