11-12
Appendix > Character Entry Method
Entering Symbols
Symbols can be entered.
1 Select the [#] key. Displays the symbol list.
2 Select the [ ], [ ], [ ] or [ ] key to move the cursor and select the symbol to be entered.
3 Select the [OK] key. The selected symbol is entered.
Entering Characters
Follow the steps shown below to enter "R&D" for example.
1 Select the [7] key three times. [r] is entered.
2 Select the [*/.] key. [r] changes to [R].
. , - _ ' ! ? (space) 0 (Repeats from the first character on the left)
0 (During number entry)
Select to change the character in the cursor position between upper case and lower case.
"*" or "." (During number entry)
Keys Characters (Each press of a key changes the character in the order from left to right.)
To Next Page
Loading...
