8-16
Setup and Registration (System Menu) > Operation Method
Wi-Fi Settings
[
Menu
] key > [ ] [ ] key > [
Network
] > [
OK
] key > [ ] [ ] key > [
Wi-Fi Settings
] > [
OK
] key
Set Wi-Fi.
Password Select whether the Wi-Fi Direct password is automatically generated or created manually.
When [Manual] is selected, the Persistent Group setting changes to [On].
Value: Auto, Manual
If you selected [Manual], set a password (8 or more characters).
Frequency band Set the frequency band to be used.
Value: 2.4GHz, 5Ghz
This function is displayed when the optional Wireless Network Interface Kit is installed.
Item Description
Wi-Fi Select whether to use Wi-Fi.
Value:
Off, On
Connect-SelectNW -
AvailableNetwork Select an access points to which the machine can connect, select the [OK] key, and enter
the WEP key or Preshared Key to start the connection.
âĸWhen [Reload] is selected, the list is reloaded.
âĸ If the access point's security setting uses WEP, select [Menu] and set [WEP Key
Index].
WEP Key Index Select the key index of the access point.
Value:
0 to 3
Connect-by Other
-
Push Button If the access point supports the push button method, wireless settings can be configured
using the push button. This setting executes push button, and the connection is started
by pressing the push button on the access point.
The push button method supports only the WPS.
PIN (Device) Starts connection using the machine's PIN code. Enter the PIN code into the access point.
The PIN code of the machine is automatically generated.
Item Description
To Next Page
Loading...
Need help?
General
