Kyocera ECOSYS PA6000 Series User Manual

8-13
Setup and Registration (System Menu) > Operation Method
Print Quality Set the Print Quality.
KIR The machine is equipped with the smoothing function, which realizes an excellent
printing of about 9600 dpi (600 dpi × 15 gradation) × 600 dpi.
Value: Off, On
EcoPrint EcoPrint conserves toner when printing. This is recommended for test copies where
faded printing is not a problem.
Values: Off, On
EcoPrint SaveLvl Select the default EcoPrint SaveLvl.
Values: 1 (Lower), 2, 3, 4, 5 (Higher)
Print Resolution Set the resolution used for printing.
Values: Fine1200, Fast1200, 600dpi, 300dpi
NOTE
Settings that are received from the printer driver have priority over the operation panel
settings.
Print Density Adjust print density. Adjustment can be made in 5 levels.
Values: 1 Lighter, 2 to 4, 5 Darker
Page Setting You can set print preferences such as the number of pages and print orientation.
Copies Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
Reduced Print Configure settings for reducing the print data and printing (reduced printing). Set the
paper size before reduction and reduction ratio.
Reduced Print Settings (page 8-14)
NOTE
In reduced printing, unlike the print result of 1x size, the line width of characters may not
be constant, or lines may be seen in figures, images, patterns, etc. Also, thin lines may not
be printed. Also, if you print the barcode in reduced size, it may not be readable.
Orientation You can select portrait (upright) or landscape (sideways) page orientation.
Value: Portrait, Landscape
LF Action Set the line feed action when the machine receives the line feed code (character code
0AH).
Values: LF Only, LF and CR, Ignore LF
CR Action Set the character return action when the machine receives the character return code
(character
code 0DH).
Values: CR Only, LF and CR, Ignore CR
Wide A4 Turn this to on to increase the maximum number of characters that can be printed in a
line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10
pitch). This setting is only effective in PCL 6 emulation.
Value: Off, On
XPS FitTo Page Set the default value for the XPS fit to page function.
Value: Off, On
TIFF/JPEG Size Select the image size (resolution) when printing JPEG or TIFF file.
Value: Paper Size, Image Resolution, Print Resolution
Item Description

Kyocera ECOSYS PA6000 Series Specifications

General

Brand	Kyocera
Model	ECOSYS PA6000 Series
Category	All in One Printer
Language	English