8-6
Setup and Registration (System Menu) > Operation Method
Job Log History
[Menu] key > [ ] [ ] key > [Report] > [OK] key > [ ] [ ] key > [Job Log History] > [OK] key
Font List Prints the font list, allowing you to check the font samples installed in the machine.
RAM File List You can print a list of the files in the RAM disk.
This setting is displayed when [RAM Disk Mode] is set to [On].
SSD File List You can print a list of the files in the SSD.
Displayed when the optional SSD is installed.
SD Card FileList You can print a list of the files in the SD Card.
Displayed when the optional SD Card is installed.
DataSanitization You can print a Data Sanitization Report.
Item Description
Auto Sending
This function automatically sends the log history to the specified destinations whenever a
set number of jobs has been logged.
Value
Off/On: Off, On
Jobs: Set the number of jobs at which the job history is automatically sent. The
setting range is 1 to 100.ī
This setting is displayed when [Off/On] is set to [On].
Send History You can also send the log history to the specified destinations manually.
Destination Set and check the destination to which log histories are sent.
Value
Confirmation: Check the destination to which log histories are sent.
Address Entry: Set the destination to which log histories are sent. Only E-mail
address can be set.
Subject Set the subject automatically entered when sending log histories by E-mail.
Value: Up to 60 characters
Personal Info. Select whether to include personal information in the job log.
Value: Include, Exclude
Item Description
To Next Page
Loading...
Need help?
General
