8-19
Setup and Registration (System Menu) > Operation Method
Item Description
IPv6 Setting Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is
[On].
IPv6 Setting Select whether to use IPv6.
Value: Off, On
Selecting [On] displays IP address in [Link Local] after restarting the network.
Manual Settings Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address: 128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway:128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
This function is displayed when [IPv6 Setting] is set to [On].
To enter "Default Gateway", set [RA (Stateless)] to [Off].
RA(Stateless) Select whether to use RA (Stateless).
Value: Off, On
This function is displayed when [IPv6 Setting] is set to [On].
Selecting [On] displays IP address in [IP Address 1 (to 5)] after restarting the network.
DHCPv6 Settings Select whether to use the DHCP (IPv6) server.
Value: Off, On
This function is displayed when [IPv6 Setting] is set to [On].
Selecting [On] displays IP address in [IP Address] after restarting the network.
DNS Server Set DNS server (IPv6).
Value: Auto (DHCP), Manual
When [Manual] is selected, you can enter static DNS server information in the Primary
and Secondary fields provided.
DNS over TLS Set whether to connect to a DNS server during communication protected by TLS.
Value: Off, On, Auto
ConnectionStatus Displays the status and name of the connected network.
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
Need help?
General
