2FP/2FY/2FR-6
1-4-8
Service items Description
Paper size
(hexadecimal)
Main cause of
paper misfeed
(hexadecimal)
(7)
(8)
01: Monarch
0D: A5
23: 216 x 316 (mm)
02: Business
0E: A6
24: A3 wide
03: International DL
0F: B6
25: Ledger wide
04: International C5
10: Commercial #9
27: 8K
05: Executive
11: Commercial #6
28: 16K
06: Letter
12: ISO B5
32: Statement
07: Legal
13: Custom size
33: Folio
08: A4
1E: C4
34: Western type 2
09: B5
1F: Postcard
35: Western type 4
0A: A3
20: Reply-paid postcard
86: Letter-R
0B: B4
21: Oficio II
88: A4R
0C: Ledger
22: 216 x 310 (mm)
89: B5R
10: Paper does not arrive at the registration sensor.
11: Paper does not pass the registration sensor.
12: Paper remains at the registration sensor when power is turned on.
20: Paper does not arrive at the eject sensor.
21: Paper does not pass the eject sensor.
22: Paper remains at the eject sensor when power is turned on.
30: Paper does not arrive at the paper feeder 1 feed sensor.
31: Paper does not pass the paper feeder 1 feed sensor.
32: Paper remains at the paper feeder 1 feed sensor when power is turned on.
40: Paper does not arrive at the paper feeder 2 feed sensor.
41: Paper does not pass the paper feeder 2 feed sensor.
42: Paper remains at the paper feeder 2 feed sensor when power is turned on.
50: Paper does not arrive at the paper feeder 3 feed sensor.
51: Paper does not pass the paper feeder 3 feed sensor.
52: Paper remains at the paper feeder 3 feed sensor when power is turned on.
60: (Reserved)
61: (Reserved)
62: (Reserved)
A1: Paper does not arrive at the vertical path sensor. (duplexer)
A2: Paper does not arrive at the switchback sensor. (duplexer)
A3: Paper does not pass the duplex refeed sensor. (duplexer)
A4: Paper does not arrive at the duplexer refeed eject sensor.
A5: Paper does not pass the duplexer refeed rear edge sensor.
A6: Paper does not pass the duplexer refeed eject sensor.
A7: Duplexer overflow (Third sheet is commanded when second sheet remains.)
A8: Duplexer drive signal output from the printer while paper is transported turns off.
A9: Paper remains in the duplexer when power is turned on.
AA: The rear cover of the duplexer is opened while paper is transported.
B1: Paper does not arrive at the tray paper sensor. (sorter)
B2: Paper does not pass the tray paper sensor. (sorter)
B3: Paper remains at the tray paper when power is turned on. (sorter)
C1: (Reserved)
E0: Paper misfeed occurs due to forced stop when an error occurs during printing.
(such as opening of a cover)
F0 to FF: Paper misfeed by another cause.
Code digit and
description
Details of code
Table 1-4-2 Code table 1
Misfed paper
width
(hexadecimal)
Misfed paper
length
(hexadecimal)
(9-a)
(9-b)
0000 to FFFF [in 0.1 mm]
Example: 73FA (hexadecimal) = 29690 (decimal) = 296.9 mm
0000 to FFFF [in 0.1 mm]
Example: A8C0 (hexadecimal) = 43200 (decimal) = 432.0 mm
To Next Page
