FS-6020
1-7-4
1. Insert the memory card to the PC’s slot or to
the adaptor.
2. Copy the firmware file to download to the root
directory of the memory card.
3. Remove the memory card from the PC's slot
or the adaptor.
1. Confirm that the printer's power switch is set
to off.
2. Insert the memory card into the printer's
memory card slot.
3. Turn printer power on. The firmware file in the
memory card will be automatically
downloaded.
4. Message display 1 is displayed during
downloading. When message display 2 is
displayed to indicate downloading is finished.
5. Turn printer power off.
6. Remove the memory card from memory card
slot.
7. Turn printer power on.
8. Confirm that message display 3 is displayed
after warm-up.
1. Print a status page. (See page 1-4-2.)
2. Check that the status page shows the
updated firmware version.
Figure 1-7-6
Memory card
Adapter
(Memory card reader/writer)
To PC
Memory card
slot
Memory card
Figure 1-7-7
Message display
Downloading
Ready
Power switch: Off
Power switch: On
1
2
3
Version 88.00
Release date
8800
02/06/07[1234]
Checksum
Memory carad
Figure 1-7-8
Copying firmware files to the memory card
Downloading firmware file
Downloading firmware file
To Next Page
Loading...
