FS-6020
1-6-8
(2) Detaching and refitting the paper feed unit
Perform the following procedure when the paper feed unit is to be checked or replaced.
Procedure
1. Remove the top cover (see page 1-6-2).
2. Remove the left cover (see page 1-6-3).
3. Remove the right cover (see page 1-6-4).
4. Remove one connector from the engine/high
voltage PWB.
Figure 1-6-7
5. Remove the hook of ground spring.
6. Remove the feed clutch and bush.
Figure 1-6-8
YC10
Connector
Engine/high voltage PWB
Feed clutch
Bush
Ground spring
To Next Page
Loading...
