1-4-1
FS-6020
1-4-1 Service mode
The printer is equipped with various service modes that can be accessed with MENU key operation on the operation
panel.
(1) Executing service mode
5 Press the key.
Message display
Ready
--- A4 PLAIN
Print
Menu Map
Other >
>Service >
>>Print
Status Page
>>Developer
>>Drum
>MSG Language
English
1 Press the MENU key.
3 Press the ENTER key.
Service mode items
4 Press the M or N key several times
until “>Service >” is displayed.
2 Press the M or N key several times
until “Other >” is displayed.
To print a status page for service purchase.
See page 1-4-2.
To perform initialization after replacing the process unit.
See page 1-4-9.
To perform drum surface refreshing.
See page 1-4-9.
To print a test pattern for detecting eraser lamp disconnection.
See page 1-4-5.
To print an event log (EVENT LOG).
(*Displayed when the set value of FRPO Ι1 is 1.)
See page 1-4-6.
>>Eraser
>>Print
Event Log
To Next Page
Loading...
