Kyocera FS-6020 - Paper Feed Section; Detaching and Refitting the Feed and Pickup Rollers

FS-6020
1-6-7
1-6-3 Paper feed section
(1) Detaching and refitting the feed and pickup rollers
Perform the following procedure when the feed roller or pickup roller is to be checked or replaced.
Procedure
1. Draw the paper cassette.
2. Push the stopper and then slide the shaft to
the stopper side.
3. Remove the feed roller or pickup roller.
4. Replace or check the feed/pickup roller.
5. Refit all the removed parts.
Figure 1-6-6
Feed roller
Stopper
Shaft
Shaft
Stopper
Pickup roller