Kyocera FS-6020 - Downloading Firmware Using the Memory Card

FS-6020
1-7-3
1. Turn printer power on.
2. Insert the memory card into the printer's
memory card slot.
3. Press MENU key on the printer’s operation
panel and carry out the memory card
formatting procedure 1.
4. When formatting is complete, turn printer
power off.
5. Remove the formatted memory card from the
memory card slot.
Figure 1-7-3
Memory card
slot
Memory card
Press the key.
Press the ENTER key.
Press the ENTER key.
Press the or key.
Press the or key.
1
Ready
Ready
Message display
Operation panel keys
Press the MENU key.
(Format information is
automatically printed.)
Memory Card >
>Format
>Format ?
Processing
Figure 1-7-4
Figure 1-7-5
Memory card
slot
Memory card
Formatting the memory card
(3) Downloading firmware using the memory card
The procedure below provides how to download firmware from a memory card.