FS-6020
1-6-24
(6) Detaching and refitting the fixing thermostat
Perform the following procedure when the fixing thermostat is to be checked or replaced.
Procedure
1. Remove the heat roller (see page 1-6-24).
2. Remove the two screws and then the terminal
plate and round terminal.
3. Remove the fixing thermostat.
4. Check or replace the fixing thermostat.
5. Refit all the removed parts.
Figure 1-6-29
Fixing thermostat
Ter minal plate
Round terminal
Screws
Fixing A nuts
To Next Page
Loading...
