FS-6020
1-3-10
1-3-4 Installing hard disk unit (optional)
Procedure
1. Remove one screw and then remove the
optional interface slot cover.
2. Insert the hard disk unit into the hard disk
socket.
3. Reattach the optional interface slot cover to
its original position.
4. Format the hard disk. (Refer to the operation
guide.)
Figure 1-3-15
Figure 1-3-16
Screw
Optional interface
slot cover
Hard disk socket
Hard disk unit
Manufactured by IBM
Capacity
340 MB
512 MB
1 GB
Model number
DMDM-10340
DSCM-10512
DSCM-11000
Hard disk units that can be installed
(Microdrive)
To Next Page
Loading...
