Kyocera FS-6020 - Page 97

FS-6020
1-6-27
7. Remove the feed unit (see page 1-6-8).
8. Remove the middle roller guide.
9. Remove the seven screws and then the
bottom frame plate.
Figure 1-6-34
10. Remove the two connectors from the engine/
high voltage PWB.
11. Remove the two screws and then the engine/
high voltage PWB.
Figure 1-6-35
Screws
Screws
Bottom frame
Middle roller guide
Screws
Connectors
Engine/high voltage PWB