Kyocera KM-2540 - User Management; Using the User Management Mode

2JB/2JC
1-3-71
1-3-2 User management
In addition to a maintenance function for service, the machine is equipped with a management function which can be oper-
ated by users. In this user management mode, settings such as default settings can be changed.
(1) Using the user management mode
Press [MP tray Setting].
Make MP tray settings (see P.1-3-78).
Press the system menu/counter key.
Start
Select the item.
Press [Job Accounting].
Enter the management code.
Manage accounting the count (see P.1-3-72).
End
Press [Copy Default].
Enter the management code.
Make copy default settings (see P.1-3-74).
Press [Machine Default].
Enter the management code.
Make machine default settings (see P.1-3-76).
Press [Register Orig. Size].
Execute original size registration (see P.1-3-78).
Press [User adjustment].
Execute user adjustment (see P.1-3-78).
Press [Print Report].
Enter the management code.
Output the report (see P.1-3-78).
Press [Counter Check].
Check and output the total copy count
(see P.1-3-78).