Kyocera KM-2540 - Adjusting the Deflection in the Paper

2JB/2JC
1-3-15
U051
Adjusting the deflection in the paper
Description
Adjusts the deflection in the paper.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Adjustment
1. Press the start key.
2. Select the item to be adjusted.
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Press the interrupt key.
6. Change the setting value using the cursor up/down keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
Figure 1-3-4
7. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
Display Description Setting
range
Initial
setting
MP TRAY Paper feed from MP tray -50 to 127 0
CASSETTE Paper feed from cassette 1 -50 to 127 50
CASSETTE2 Paper feed from cassette 2 -50 to 127 50
DUPLEX Duplex mode (second side) -50 to 127 40
MP TRAY (THICK) Paper feed from MP tray (thick paper) -50 to 127 10
Original Copy
example 1
Copy
example 2