Kyocera KM-2540 - Setting Auto Application Change Time; Setting Service Status Page; Setting the Main Charger Cleaning Indication

2JB/2JC
1-3-50
U277
Setting auto application change time
Description
Sets the time that passes until the machine starts automatically printing after completing copying or operation
when the machine is used as a printer.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Change the setting using the cursor up/down keys.
The setting can be changed by 30 s per step.
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U285
Setting service status page
Description
Determines displaying the toner coverage report on reporting.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U324
Setting the main charger cleaning indication
Description
Sets whether to display the maincharger cleaning guidance.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: ON
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Maintenance
item No.
Description
Description Setting range Default setting
Switching time 30 to 270 (s) 30 (s)
Display Description
ON Displays the toner coverage
OFF Not to display the toner coverage
Display Description
ON Displays the main charger cleaning guidance
OFF Not to display the main charger cleaning guidance