2JB/2JC
1-3-11
U033
Checking solenoid operation
Description
Applies current to each solenoid in order to check its ON status.
Purpose
To check the operation of each solenoid.
Method
1. Press the start key.
2. Select the solenoid to be operated. The solenoid turns on for 1 s.
*Optional.
3. Press the interrupt key.
Main motor (MM) and paper feed motor (PFM) are turned on.
To stop driving motors, press the interrupt key again.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Solenoids
BRANCH1 Feedshift solenoid (FSSOL)
BRANCH2 Feedshift solenoid (FSSOL)*
To Next Page
Loading...
