2JN
1-1-1
1-1 Specif ications
1-1-1 Specifications
Type ................................................Desktop
Printing method...............................Electrophotography by semiconductor laser, single drum system
Originals..........................................Sheet, Book, 3-dimensional objects (maximum original size: Folio/Legal)
Original feed system .......................Contact glass: fixed
Document processor (optional): sheet-through
Paper weight...................................Cassette: 60 to 120 g/m
2
(Duplex: 60 to 120 g/m
2
)
MP tray: 60 to 220 g/m
2
, 230 µm (Cardstock)
Paper type ......................................Cassette:
Plain, Rough, Recycled, Preprinted, Bond, Color (Colour), Prepunched,
Letterhead, High Quality, Custom 1 to 8 (Duplex: Same as simplex)
MP tray:
Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond,
Cardstock, Color (Colour), Prepunched, Letterhead, Thick, Envelope, High Quality,
Custom 1 to 8
Paper size.......................................Cassette:
Maximum: 8
1/2 × 14"/A4 (Duplex: 8 1/2 × 14"/A4)
Minimum: 5
1/2 × 8 1/2"/A6 (Duplex: 7 1/4 × 10 1/2"/A5)
MP tray:
Maximum: 8
1/2 × 14"/A4
Minimum: 3
5/8 × 6 1/2"/C5
Magnification ratios.........................Manual mode: 25 - 400%, 1% increments
Printing speed (Simplex).................A4: 28 ppm
Letter: 30 ppm
Legal: 24 ppm
B5R: 22 ppm
A5R: 17 ppm
A6R: 17 ppm
First print time (
A4, feed from cassette
).When using the document processor: 7.9 ±0.5 seconds
When the document processor is not used: 6.9 ±0.5 seconds
Warm-up time (
22
°
C/71.6
°
F, 60 %RH
) .Power on: 20 seconds
Recovery from the low power mode: 15 seconds or less
Recovery from the sleep mode: 15 seconds or less
Paper capacity ................................Cassette: 250 sheets (80 g/m
2
)
MP tray: 50 sheet (80 g/m
2
, plain paper, Letter/A4 or smaller)
Output tray capacity........................150 sheets (80 g/m
2
)
Continuous printing.........................1 to 999 sheets
Photoconductor...............................OPC drum (diameter 30 mm)
Image write system.........................Semiconductor laser (1 beam)
Charging system.............................Scorotron (positive charging)
Developing system .........................Mono component dry developing method
Toner replenishing: Automatic from the toner container
Transfer system ..............................Transfer roller (negative-charged)
Separation system ..........................Small diameter separation, discharger brush
Cleaning system .............................Drum: Counter blade
Charge erasing system...................Exposure by eraser lamp (LED)
Fixing system.................................. Heat roller system
CPU ................................................PowerPC440/667MHz
Memory...........................................Standard: 256 MB
Maximum: 768 MB
Resolution.......................................600 × 600 dpi
Operating environment ...................Temperature: 10 to 32.5
°C/50 to 90.5 °F
Humidity: 15 to 80%
Altitude: 2,500 m/8,202 ft maximum
Brightness: 1,500 lux maximum
Dimensions (W × H × D) .................494 × 430 × 448 mm
19
7/16 ×16 15/16 ×17 11/16"
Weight.............................................Approx. 18 kg/40 lbs
Floor requirements (W × D) ............640 × 646 mm
25
3/16 × 25 7/16"
To Next Page
Loading...
Need help?
General
