2JN
1-3-80
(3) Copy Settings
Photo Processing
1. Select [Photo Processing] using the cursor up/
down keys.
2. Press the OK key.
3. Select [Dithering(Normal)] or [Dithering(Rough)].
4. Press the OK key.
Paper Selection
1. Select [Paper Selection] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Auto] or [Def. Paper Source].
4. Press the OK key.
Auto Paper Selection
1. Select [AutoPaperSelect.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [MostSuitableSize] or [Same as OrigSize].
4. Press the OK key.
Auto % Priority
1. Select [Auto % Priority.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Off] or [On].
4. Press the OK key.
Select Key Set
1. Select [Select Key Set.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Left] or [Right].
4. Press the OK key.
5. select the function you want to register to the flexi-
ble key.
6. Press the OK key.
(4) Sending Settings
Select Key Set
1. Select [Select Key Set.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Left] or [Right].
4. Press the OK key.
5. Select the function you want to register to the flexi-
ble key.
6. Press the OK key.
DestinationCheck
1. Select [DestinationCheck] using the cursor up/
down keys.
2. Press the OK key.
3. Select [Dest. Confirm] or [Check New Dest.].
4. Press the OK key.
5. Select [Off] or [On].
6. Press the OK key.
(5) Document Box Settings
Select Key Set
1. Select [Select Key Set.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Print] or [Store].
4. Press the OK key.
5. Select [Left] or [Right].
6. Press the OK key.
7. Select the function you want to register to the flexi-
ble key.
8. Press the OK key.
To Next Page
Loading...
Need help?
General
