2JN
1-3-88
(15) FAX Settings
Rings
1. Select [Reception] using the cursor up/down keys.
2. Press the OK key.
3. Select [Rings(Normal)], [Rings(TAD)] or
[Rings(FAX/TEL)].
4. Press the OK key.
5. Enter the number of ringing times.
6. Press the OK key.
Retry Times
1. Select [Transmission] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Retry Times] using the cursor up/down
keys.
4. Press the OK key.
5. Enter the number of retry times.
6. Press the OK key.
Receiving Mode
1. Select [Reception] using the cursor up/down keys.
2. Press the OK key.
3. Select [RX Settings] using the cursor up/down
keys.
4. Press the OK key.
5. Select the desired receiving mode.
6. Press the OK key.
Reception Date/Time
1. Select [Reception] using the cursor up/down keys.
2. Press the OK key.
3. Select [RX Date/Time] using the cursor up/down
keys.
4. Press the OK key.
5. Select [On].
6. Press the OK key.
Media Type for Print Output
1. Select [Reception] using the cursor up/down keys.
2. Press the OK key.
3. Select [FAX Media Typ] using the cursor up/down
keys.
4. Press the OK key.
5. Select the desired paper type.
If you do not specify any paper type, select [All
Media Type].
6. Press the OK key.
Registering Permit FAX No.
1. Select [TX/RX Restrict.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Permit No. List] using the cursor up/down
keys.
4. Press the OK key.
5. Select [Menu].
6. Select [Add FAX Number] using the cursor up/down
keys.
7. Press the OK key.
8. Enter a Permit FAX number. Up to 32 digits can be
entered.
9. Press the OK key.
10. When registering other Permit FAX numbers,
repeat steps 5 to 9.
Changing and Deleting Permit FAX No.
1. Select [TX/RX Restrict.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Permit No. List] using the cursor up/down
keys.
4. Press the OK key.
5. Select the Permit FAX No. to be changed or
deleted.
6. To change Permit FAX No., go to step 7, and to
delete Permit FAX No., go to step 11.
7. Select [Menu].
8. Select [Detail/Edit] and press the OK key.
9. Reenter the Permit FAX number. Up to 32 digits
can be entered.
10. Press the OK key.
11. Select [Menu].
12. Select [Delete] and press the OK key.
13. Select [Yes]. This deletes the Permit FAX number.
14. To change or delete other Permit FAX numbers,
repeat steps 5 to 13.
Registering Reject FAX No.
1. Select [TX/RX Restrict.] using the cursor up/down
keys.
2. Press the OK key.
3. Select [Reject No. List] using the cursor up/down
keys.
4. Press the OK key.
5. Select [Menu].
6. Select [Add FAX Number] using the cursor up/down
keys.
7. Press the OK key.
8. Enter a Reject FAX number. Up to 32 digits can be
entered.
9. Press the OK key.
10. When registering other Reject FAX numbers,
repeat steps 5 to 9.
To Next Page
Loading...
Need help?
General
