Kyocera Mita FS-1128MFP Service Manual

2JN
1-5-45
(3) Detaching and refitting the high voltage PWB
Procedure
1. Remove the developing unit (See page 1-5-
29).
2. Remove the drum unit (See page 1-5-30).
3. Remove the cassette (See page 1-5-6).
4. Remove the left cover and right cover (See
page 1-5-3).
5. Remove the power source PWB (See page
1-5-42).
6. Turn the machine with the front side up.
7. Remove the stopper.
8. Remove the DU holder.
Figure 1-5-68
9. Pull the DU bush out.
10. Remove the DU cover assembly.
Figure 1-5-69
DU holder
Stoppe
r
DU bush
DU cover
assembly

Kyocera Mita FS-1128MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	20, 000 pages
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 Kbps
Print Speed	28 ppm
Copy Speed	28 cpm
Standard Paper Capacity	250 sheets
Automatic Document Feeder (ADF)	50 sheets