Kyocera Mita FS-1128MFP Service Manual

2JN
1-5-44
9. Remove four screws and then remove the
power source PWB from the power source
PWB plate.
10. Check or replace the power source PWB
and refit all the removed parts.
Caution: The power source PWB sheet
must be installed in the specified position.
Figure 1-5-67
Screws
Screw
Power source PWB
Power source
PWB plate
Power source
PWB sheet
Screw

Kyocera Mita FS-1128MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	20, 000 pages
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 Kbps
Print Speed	28 ppm
Copy Speed	28 cpm
Standard Paper Capacity	250 sheets
Automatic Document Feeder (ADF)	50 sheets