2JN-2
1-3-6
(3) Contents of the maintenance mode items
Maintenance
item No.
Description
U000
Outputting an own-status report
Description
Outputs lists of the current settings of the maintenance items and paper jam and service call occurrences.
Outputs the event log. Also sends output data to the USB memory.
Printing a report is disabled either when a job is remaining in the buffer or when [Pause All Print Jobs] is
pressed to halt printing.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences. Before initial-
izing or replacing the backup RAM, output a list of the current settings of the maintenance items to reenter the
settings after initialization or replacement.
Method
1. Press the start key.
2. Select the item to be output using the cursor up/down keys.
3. Press the start key. The interrupt print mode is entered and a list is output.
When A4/Letter paper is available, a report of this size is output. If not, specify the paper feed location.
When output is complete, the screen for selecting an item is displayed.
Method: Send to the USB memory
1. Press the power key on the operation panel, and after verifying the main power indicator has gone off,
switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the item to be send.
7. Select [TEXT] or [HTML].
8. Press the start key.
Output will be sent to the USB memory.
Display Output list
MAINTENANCE List of the current settings of the maintenance modes
EVENT Outputs the event log
ALL Outputs the all reports
Display Output list
Print Outputs the report
USB (TEXT) Sends output data to the USB memory (text type)
USB (HTML) Sends output data to the USB memory (HTML type)
To Next Page
Loading...
Need help?
General
