2JN
1-3-5
Fax U651 Setting modem 2
Modem output level
DTMF output level (main value)
DTMF output level (level difference)
9 (120 V)
*2
10 (220-240 V)
*2
5 (120 V)
*2
10.5 (220-240 V)
*2
2 (120 V)
*2
2.5 (220-240 V)
*2
U660 Setting the NCU
Setting the connection to PBX/PSTN
Setting PSTN dial tone detection
Setting busy tone detection
Setting for a PBX
Setting the loop current detection before dialing
PSTN
*2
ON
*2
ON
*2
LOOP
*2
ON
*2
U670 Outputting lists -
U695 FAX function customize ON/OFF
U699 Setting the software switches -
Others U901 Checking copy counts by paper feed locations -
U903 Checking/clearing the paper jam counts -
U904 Checking/clearing the service call counts -
U905 Checking/clearing counts by optional devices -
U908 Checking the total counter value -
U910 Clearing the black ratio data -
U911 Checking/clearing copy counts by paper sizes -
U917 Setting backup data reading/writing -
U920 Checking the copy counts -
U927 Clearing the all copy counts and machine life counts (one time
only)
-
U928 Checking machine life counts -
U942 Setting of deflection for feeding from DP 0/0
U969 Checking of toner area code -
U977 Data capture mode -
U991 Checking the scanner count -
U993 Outputting a VTC-PG pattern -
Section Item
No.
Content of maintenance item Initial
setting*
*: Factory initial setting, *1: The item initialized for executing U021, *2: The item initialized for executing U600
To Next Page
Loading...
Need help?
General
