LaCie Ethernet Disk RAIDNetwork RAID Storage System - Page 36

LaCie Ethernet Disk RAID (Firmware version 1.4)
User Manual
page 35
Managing Your Ethernet Disk RAID
Specify which users should belong to this group, and
then click OK. See the table, below.
5.
To accomplish this Do this
Add all users to the group Click Add All Users. All users move from the Available users list to the Group
members list.
Add selected users to the
group
In the Available users list, select the user(s) that you want to add and then click Add
Selected User(s).
Remove all users from the
group
Click Remove All Users. All users move from the Group members list to the Avail-
able users list.
Remove selected users from
the group
In the Group members list, select the user(s) that you want to remove from the
group and then click Remove Selected User(s).
TeChNICAl NOTe: To select multiple, con-
tiguous users, hold down the Shift key and select
the first user, then select the last user. All users
between the first and last selected user are select-
ed. To select multiple, non-contiguous users, hold
down the Ctrl key as you select each user.