LaCie Ethernet Disk RAIDNetwork RAID Storage System - Activating Your License with an Internet Connection; Replacing Your Existing License

LaCie Ethernet Disk RAID (Firmware version 1.4)
User Manual
page 90
Protecting Local Disks
7.1.7. Activating Your License with an Internet Connection■
If your license wasn’t activated because your com-
puter has no Internet connection, you must obtain an
activation code using another computer that does have
both an Internet connection and e-mail.
To activate your license without an Internet connec-
tion:
From the Action menu, click License Offline
Activation. e Offline Activation dialog box ap-
pears.
Click Export License Data.
On the Save As dialog box, select one of the follow-
ing locations and then click Save:
A shared folder accessible to both your computer and
a computer that has Internet and e-mail access
A floppy disk
A USB disk
If you did not save the file to a shared folder, take the
floppy disk or USB disk to a computer with Internet
and e-mail access.
From the computer that has Internet and e-mail ac-
cess, e-mail the license file to the following address:
Activate.Keycode@falconstor.com
1.
2.
3.
❖
❖
❖
4.
5.
When you receive an e-mail response, save the re-
turned license file back to the shared folder, floppy
disk, or USB disk.
If you did not save the file to a shared folder, take the
floppy disk or USB disk back to the computer where
Client Backup and Recovery is installed.
From the Action menu, click License Offline
Activation.
Click Import Activation Code.
On the Open dialog box, browse to the location
where the returned license file exists and double-
click it.
On the confirmation message, click OK. e license
is now activated and you can continue to back up and
recover your disks.
To close the dialog box, click Exit.
6.
7.
8.
9.
10.
11.
12.
7.1.8. Replacing Your Existing License■
1. From the Action menu, click License Add
License. e Add License dialog box displays your cur-
rent license key code.
2. In the License key code text box, enter the new
key code.
3. Click OK.
4. When the confirmation message appears, click
OK.
If your computer has an Internet connection, the
license is activated automatically. If your Internet con-
nection is temporarily down, repeat this procedure when
your Internet connection is restored. (You do not have
to re-enter the key code.) If your Internet connection is
temporarily down, your license will be activated auto-
matically the next time you run Windows Backup Soft-
ware with a restored Internet connection.