EasyManua.ls Logo

LaCie Ethernet Disk RAIDNetwork RAID Storage System - Getting Started; System Requirements

LaCie Ethernet Disk RAIDNetwork RAID Storage System
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LaCie Ethernet Disk RAID (Firmware version 1.4)
User Manual
page 82
Protecting Local Disks
7.1. Getting Started
7.1.1. System Requirements
Windows Users
Microsoft Windows XP Home Edition or Pro-
fessional (with or without Service Pack 1 or Ser-
vice Pack 2), Microsoft Windows Server 2003,
Microsoft Windows 2000 Professional, Server, or
Advanced Server with Service Pack 4
An enabled network interface card.
A CD-ROM drive (for installation and using the
recovery CD).
Microsoft iSCSI Initiator*2.x
20 MB free hard disk space
Each computer where Windows Backup Software is
installed must have the following:
TeChNICAl NOTe: A CD-ROM drive is
not required for installation if an image of the
CD is accessible via a network server.
ImpOrTANT INfO: For information about
downloading and installing this item, refer to
the next section, “Installing the Microsoft iSCSI
Initiator.”
ImpOrTANT INfO: Windows Backup
Software requires the Intelligent Management
Agent (IMA), which is installed automatically if
it is not already installed.
IMA requires an additional 5 MB of free hard
disk space (for both the application and associ-
ated log file data).
e Microsoft .NET* Framework 1.1 is also re-
quired and installed automatically if it is not al-
ready installed. e .NET Framework requires
approximately 40 MB of additional free hard
disk space.

Table of Contents

Related product manuals