LaCie Ethernet Disk RAID (Firmware version 1.4)
User Manual
page 55
Managing Your Ethernet Disk RAID
tion, no authentication will be performed.
6. If your e-mail server cannot use the default sender e-
mail address (root@localhost), or if you want the in-
dividuals who receive e-mail notifications to be able
to reply to the alert, enter the address that you want
to appear as the return address in the Sender e-mail
address text box.
For example, you could enter your own e-mail ad-
dress (such as MyName@MyCompany.com).
7. In the First e-mail address text box, enter the e-mail
address of an individual who should receive e-mail
notifications when a problem occurs. e e-mail
address can be up to 128 characters long and must
include the @ symbol (for example, MyName@My-
Company.com).
8. If you want e-mail notifications to be sent to other
individuals as well, enter the appropriate e-mail ad-
dresses in the Second e-mail address and ird e-
mail address text boxes.
9. Click Apply.
10. When the confirmation message appears, click OK.
11. To confirm that the configuration is correct, click
Test E-mail, and click OK on the confirmation mes-
sage.
is sends a test message to the specified recipients.
If they do not receive the test message, make sure
that all the entries on this page are correct. You might
also have to modify the network settings (such as the
gateway to use). For information about changing the
network settings, refer to section 5.7.5. Network .
To Next Page
Loading...
