LaCie Ethernet Disk RAID (Firmware version 1.4)
User Manual
page 59
Managing Your Ethernet Disk RAID
Make the desired changes:3.
System Settings Options■
To change this Do this
e system name In the Storage system name text box, enter the new name to
use for the Ethernet Disk RAID. is name can be up to 15 characters long and
can include letters, numbers, and hyphens.
e system date, time, or time
zone
In the Date fields, enter or select the desired month, date, and year.
In the Time field, enter or select the desired hour, minute, and second.
In the Time zone list, select the desired time zone.
❖
❖
❖
Network Time Protocol (NTP)
server name or IP address
In the NTP server name or IP address text box, enter the name or IP address of
the NTP server from which the storage
system should set its time. e Ethernet Disk RAID will synchronize its time with
the NTP server every hour. You can use a name only if it is resolvable.
e administrator name or
password
In the Administrator name text box, enter the user name to use for logging in to
the Manager. In the Password and Confirm password text boxes, enter the pass-
word to use for logging in to the Manager.
e user name and password are case-sensitive.
Click Apply.
When the confirmation message appears, click OK.
4.
5.
To Next Page
Loading...
