Lamtec F300K Series - Order Information

122
14 Appendix
14.4 Order Information
* (Default setting) FFDT = Flame Failure Detection Time
NOTICE
Example:
Standard version F300K UV-4 UI = 659A50 - 04/UI/0/0
A 10 Spectrum Selection
Type UVIR-1 UV/IR spectral range 210 ... 360 nm, 1000 ... 1700 nm 17
Type UV-4 UV spectral range 215 ... 360 nm 04*
Type IR-2 IR spectral range 850 ... 1,200 nm 10
Type IR-3 IR spectral range 1,000 ... 1,700 nm 11
Type IR-4 IR spectral range 1,000 ... 2,200 nm 12
* (Default setting)
A 20 Operating Unit Selection
With integrated operating unit UI*
With LED display 0
* (Default setting)
* (Default setting)
A 40 Customer Parameters Selection
STANDARD PARAMETERIZATION FFDT 1s* 0
FFDT 2s 2
FFDT 3s 3
FFDT 4s 4
FFDT 5s 5
Special parameterization (only with surcharge) SO
F300K Accessories Selection
Power supply units
Power supply unit FN20, 230 VAC, 50/60 Hz / 24 VDC, IP20, with relay output, mounting on a DIN rail 659R6010
Power supply unit FN20, 115 VAC, 50/60 Hz / 24 VDC, IP20, with relay output, mounting on a DIN rail 659R6010/115
Power supply unit FN30-20, 230 VAC, 50/60 Hz / 24 VDC, with relay output, IP66 housing 659M0101
Power supply unit FN30-20, 115 VAC, 50/60 Hz / 24 VDC, with relay output, IP66 housing 659M0102
Power supply unit FN30-00, 100 ... 240 VAC, 50/60 Hz / 24 VDC, IP20, for mounting on a DIN rail 659M0400
Power supply unit FN30-10, 100 ... 240 VAC, 50/60 Hz / 24 VDC, in IP65 housing 659M0401
Connecting Cable/Extension Cable Selection
Connecting cable/extension cable, 3 m/9,84 ft long 659N0500
Connecting cable/extension cable, silicone, 3 m/9,84 ft long 659N0510
Connecting cable/extension cable, 5 m/16,40 ft long 659N0501