Lamtec F300K Series - Parameterising the User Interface

77
7 Operation
7.6.2 Parameterising the User Interface
Setting the device parameters of the operating unit
You will find more information on the values in the following table:
Apply with or reject with .
Icon Name Value Explanation
80: Display 1,
background lighting
Seconds Lighting duration, 180 seconds = default
81: Display 2,
graphical display
% Contrast, 50 % = default
82:
1
CAN1 termination 0/1
OFF, ON (bus terminating resistor)
0 = default
86:
 Level meter 1 1 ... 4
Decay time constant for peak values
small ... large
87:
 Level meter 2 1 ... 4
Response time constant for peak values
small ... large