19
3 Product Description
3.7.8 Connection Cable AK05
DANGER!
The Connection Cable are approved for use with SELV or PELV only.
NOTICE
For special requirements it may be necessary to protect cable additionally.
The specific installation rules are to be observed.
NOTICE
Only the Connection Cable AK05-51 is UL Listed approofed. For the use of the Flame scan-
ner as UL Recognized approofed, the other Connection Cable can be used.
Devices shall be wired in accordance with NEC field wiring requirements for the
location.
Fig. 3-16 Connection Cable AK05-51
To Next Page
Loading...
General