52
7 Operation
7.2 Enter Password
The operating menu is protected by passwords. If you do not enter a password:
• You can only display information.
• You cannot change safety-related parameters.
When you enter a password, this gives you time-limited access to the associated password
level. When you enter a valid password, you get access to additional information and param-
eters that you can change.
Entering a password and accessing the standard level (level 1)
NOTICE
The following password levels are available:
• Password level 1: standard level – entry of 0000 (state on delivery - should changed after
commissioning
– limited manual parameterisation possible
• Password level 2: expert level – entry of XXXX (state on delivery - you should change it
to customer password after commissioning )
– extensive manual parameterisation possible
• Password level 4: entry via the LAMTEC hotline only (factory level)
– full manual parameterisation possible
Access is available to password level 0.
Access is now available to password level 1.
To Next Page
Loading...
General