Lamtec F300K Series User Manual

61
7 Operation
7.4 Automatic setting
The following sections inform you how automatic parameter setting works with the operating
unit.
You will find information on automatic parameter setting in Section 6.4.4.1 Automatic setting.
Fig. 7-8 Overview of automatic parameter setting
1 Align
2 Record flame ON
3 Record flame OFF
4 Analyse
5 Hand optimization
6 Amplification IR
(only double sensor)
7 Weighting
(only double sensor)

Lamtec F300K Series Specifications

General

Brand	Lamtec
Model	F300K Series
Category	Scanner
Language	English