49
6 Commissioning
6.5 Acceptance
NOTICE
Obligation to provide evidence
Due to the obligation to provide documentary evidence to testing authorities, for quality man-
agement systems or to clarify liability issues and so on, we urgently recommend that you doc-
ument your checks of the parameter settings. This documentary evidence can be included in
the burner's settings log.
This can be done by reading out the parameters and/or the CRC of the safety-related param-
eter sets of modes 1, 2 and 3 for the "flame ON" state by means of the user interface.
We recommend that you use the F300K Remote Software to save or make a note of the soft-
ware version number at the time of the check and the individual parameters as a data set.
To Next Page
Loading...