LeCroy WaveAce series User Manual

Getting Started Manual
WA-GSM-E RevB
30
2. Persist - Sets the length of time (1 sec, 2 sec, 5 sec, Infinite) each
displayed sample point remains displayed.
3. Intensity - Turn the Universal front panel knob to set the Intensity.
4. Brightness - Turn the Universal front panel knob to set the screen
brightness.
5. Format - Choose between YT format and XY format.
6. Screen - Set to Normal mode or Inverted color display mode.
7. Grid - Display grids and axes, turn off grids, or turn off grids and
axes.
8. Menu Display - Set the length of time the menus are shown on
screen (2 seconds, 5 seconds, 10 seconds, 20 seconds, or infinite).
Understanding Display Information
The grid area contains several indicators to help you understand the
display. Indicators are coded to the channel colors).
The previously numbered indicators correspond with the following
explanations.
1. Trigger Status - The following four states are shown as highlighted
text on this part of the screen.

LeCroy WaveAce series Specifications

General

Channels	2 or 4
Vertical Resolution	8-bit
Input Coupling	AC, DC, GND
Power Supply	100-240 VAC, 50/60 Hz
Sample Rate	2 GS/s
Display	800 x 480
Input Impedance	1 MΩ
Timebase Range	5 ns/div to 50 s/div
Trigger Types	Edge, Pulse Width, Video, Slope
Connectivity	USB host, USB device