LeCroy WaveAce series User Manual

WaveAce Series
99
WA-GSM-E RevB
Reference
WaveAce Specifications
Note: Specifications are subject to change without notice.
Please refer to the LeCroy website at www.lecroy.com or the online help
on your LeCroy oscilloscope for detailed specification information.
CERTIFICATIONS
CE Compliant, UL, and cUL Listed
CE Declaration of Conformity
The oscilloscope meets requirements of EMC Directive 2004/108/EEC for
Electromagnetic Compatibility and Low Voltage Directive 2006/95/EEC for
Product Safety.
EMC Directive
 EN 61326-1:2006
 EMC requirements for electrical equipment for measurement,
control, and laboratory use.
ELECTROMAGNETIC EMISSIONS:
 EN 55011/A2:2002, Radiated and conducted emissions (Class A)*
 EN 61000-3-2:2006 Harmonic Current Emissions (Class A)
 EN 61000-3-3/A2:2005 Voltage Fluctuations and Flickers (Pst = 1)
ELECTROMAGNETIC IMMUNITY:
 EN 61000-4-2:2001** Electrostatic Discharge.
(4 kV contact, 8 kV air, 4 kV vertical/horizontal coupling planes)
 EN 61000-4-3:2006** RF Radiated Electromagnetic Field.
(3 V/m, 80-1000 MHz; 3 V/m, 1400 MHz - 2 GHz; 1 V/m, 2 GHz - 2.7
GHz)
 EN 61000-4-4:2004** Electrical Fast Transient/Burst.
(1 kV on power supply lines, 0.5 kV on I/O signal data and control
lines)

LeCroy WaveAce series Specifications

General

Channels	2 or 4
Vertical Resolution	8-bit
Input Coupling	AC, DC, GND
Power Supply	100-240 VAC, 50/60 Hz
Sample Rate	2 GS/s
Display	800 x 480
Input Impedance	1 MΩ
Timebase Range	5 ns/div to 50 s/div
Trigger Types	Edge, Pulse Width, Video, Slope
Connectivity	USB host, USB device