xiv
D-H001.0609EN
7.19 Examine the vacuum pump oil level 7-22
7.20 Measure the Temperature of the Hot Cleaning Water 7-23
7.21 Measure the Concentration of Astri®-L 7-24
7.22 Replace the Filter Element of the Single Filter 7-25
7.23 Replace the Filter Element of the Twin Filter 7-27
7.24 Replace the Teat Cup Liners 7-28
8. Corrective maintenance 8-1
8.1 Replace the Cleaning Brushes 8-1
8.2 Replace a Twin Tube 8-2
8.3 Shorten a Twin Tube 8-5
9. Test and Adjustment 9-1
9.1 Test the Save-Life Switch 9-1
9.2 Adjust the service positions 9-3
9.2.1 Adjust the Home Position 9-3
9.2.2 Adjust the Service-1 Position 9-3
9.2.3 Adjust the Service-2 Position 9-3
9.2.4 Adjust the Service-3 Position 9-4
9.3 Adjust the ACID:HYPO ratio 9-5
9.4 Adjust the Quantity of Pre-treatments 9-5
9.5 Adjust the Milk Separation Settings for Calving Cows 9-6
9.6 Adjust the Milk Separation Settings for Sick Cows 9-6
10. Troubleshooting 10-1
10.1 The Milk is Moving Up and Down/ Is Not Transported 10-1
10.2 Brushes Are Dirty After Cleaning 10-1
10.3 Troubleshooting Flowcharts 10-2
10.3.1 Alarms and Phone Calls 10-2
11. Diagrams 11-1
11.1 Milking Robot 11-1
11.1.1 LH Length Dimensions (Metric) 11-1
11.1.2 LH Width Dimensions (Metric) 11-2
11.1.3 LH Length Dimensions (Imp) 11-2
11.1.4 LH Width Dimensions (Imp) 11-3
11.1.5 RH Length Dimensions (Metric) 11-3
To Next Page
Loading...
