6-8 Operating Instructions
D-H001.0609EN
6.8 Empty the milk tank
1. Make sure the milk hose from the milk tanker is connected to the milk tank.
2. On the CRS+ select:
-
Main Menu > Settings > Cleaning system settings > Milk reception.
3. Identify the configuration of the system.
4. If the configuration of the system is
one tank, one tank with bufferbarrel Boetech , or one tank with
buffertank
:
1. Press
.
2. When the LED on the left of the button is green select:
- Main Menu > Cleaning system > Open milktank valve > Open.
3. Press [
Enter].
4. When the tank is empty, disconnect the milk hose from the milk tank.
5. Clean the milk tank.
6. Select:
-
Main Menu > Cleaning system > Open milktank valve > Close .
7. Press [
Enter].
8. Press
.
5. If the configuation of the system is
one tank with automatic cleaning refer to the documentation
supplied with the system.
To Next Page
Loading...
