7-12 Preventive Maintenance
D-H001.0609EN
7.9 Examine the alarms
1. Examine the attention alarms on the X-link, T4C or the CRS+ as follows:
- On the X-Link:
1. Select Tab [
Indications].
- On the T4C system:
1. Refer to the T4C manual.
- On the CRS+:
1. Select:
Main Menu > Alarm system > List active alarms.
2. If necessary, correct the problems shown by the attention alarms.
Note:
Cows with a milking interval of more than 10 hours must be guided into the milking
robot.
Cows with a different conductivity, colour attention, feed intake or milk yield must be
examined for (udder) health.
To Next Page
Loading...
