Preventive Maintenance 7-13
D-H001.0609EN
7.10 Examine the Cleaning Brushes
1. Take the milking robot out of operation with the X-link (page 6-5).
2. Move the Robot Arm to the Service Position.
3. Examine the cleaning brushes and make sure they are clean and not damaged.
4. If the cleaning brushes are damaged, replace the cleaning brushes (page 8-1).
5. Put the milking robot in operation with the X-link (page 6-3).
6. Start a Short Rinse (X-link) (page 6-15).